PPG Paints
Product Type
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Find paint & wood stains for your next project.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
PPG Flooring™ 980 Water Clear Epoxy
- Excellent abrasion and impact resistance
- Very good chemical resistance
- Low odor
protective
01100400/3U, PM100-00/02, PM125-B/01, PM127-B/01, PM126-B/01
SFT 610 - Part A (Base)
- Fine texture finish for easy cleaning
- Suitable for recreational marine and industrial environments
- Excellent adhesion to a variety of surfaces
protective
SFT610-60/01
PPG NOVAGUARD® 5043
- Easy to apply, self-leveling
- Low odor
- Resists concentrated acids, caustics and some solvents
protective
504371/5U, 504371-A/05, 505371-A/05, 505111-A/01, 505371-B/01, 504371-B/01, 505111-B/01
NOVAGUARD™ 7350
- Rapid cure and return-to-service
- Good chemical and heat resistance
- Spray, brush and roller application
protective
445044-A/01, 445044-B/32
PPG Flooring™ 682 MMA Sealer Resin
- Rapid cure and return-to-service
- Excellent adhesion to concrete
- Resistant to water and chemicals
protective
FLR682-A/05
PPG Flooring™ 2600 LS
- Monolithic - Seamless Surface
- Excellent Chemical Resistance
- Applicator Friendly – Easy To Apply
protective
445186-C/66
SFT 650
- 1.05 coefficient of friction - wet or dry
- Resists oil, gasoline, acids, caustics, and most solvents
- Vehicular grade anti-slip
protective
SFT650-15/21, SFT650-02/21, SFT650-60/21, SFT650-15/29
PPG Quick Mender® X.O.
- Ultra Low Viscosity in Neat Configuration Will Penetrate Concrete for Permanent Bond
- Cures in 30 Minutes for Quick Open to Traffic
- Will Cure at -30°F. Cure Time Will Be Extended at Lower
protective
QMXO-B/01, QMXO-B/04, QMXO-A/04, QMXO-A/01
PPG Flooring™ 412 CS Coating System
- Easy application
- Excellent adhesion
- In accordance with EOS/ESD Association 7.1 Standard
protective
412CON-A/05, 412ESD-A/05, 412CSTC-2/05, 412CSGP-B/01, 412CRTC-2/05
PPG FLOORING SELF-LEVELING EPOXY - Part A (Base)
- PPG FLOORING SELF-LEVELING EPOXY is a multi-component product. All components are required for use.
- Excellent adhesion and abrasion resistance
- Solvent free
protective
FLR600-0/05, FLR600-20/05, FLR600-210/05, FLR600-3/05
PPG Flooring™ ICO Glaze CR
- Two-part, 100% solids, zero VOC epoxy wall and ceiling coating
- Seals block walls and other porous CMU surfaces without use of any block fillers
- Applied by brush, roller or spray at 20-30 mils total dry film thickness
protective
51311WT-A/01, 51311WBFB/01, 51311WBF-A/01, 51311WT-B/01, 513111B-B/01, 513111B-A/01, 51314WB-A/05
PPG Flooring™ 833 CR
- Rapid cure and return-to-service
- FDA/USDA compliant for incidental food contact
- Excellent chemical resistance
protective
447018-B/01, 445253-C/66, 447017-A/03, 455033-A/03, 445049-B/01
SFT 610 - Kit
- Fine texture finish for easy cleaning
- Resists oil, gasoline, acids, caustics, and most solvents
- Suitable for recreational marine and industrial environments
protective
SFT610-04/21, SFT610-15/21, SFT610-60/21, SFT610-02/21
Thinner 21-85 / 97-739
- Available in different pack sizes
- Recommended usage per specific product datasheet
protective
97-739/05, 97-739/04, 97-739/01
Thinner 50-63 / 97-736
- Available in different pack sizes
- Recommended usage per specific product datasheet
protective
97-736/05, 97-736/01
Thinner 91-31 / 97-734
- Available in different pack sizes
- Recommended usage per specific product datasheet
protective
97-734/05, 97-734/01
Thinner 91-30 / 97-730
- Available in different pack sizes
- Recommended usage per specific product datasheet
protective
97-730/01
Thinner 91-25 / 97-725
- Available in different pack sizes
- Recommended usage per specific product datasheet
protective
97-725/05, 97-725/55, 97-725/01
