Skip to Content

Your Favorites

  • LIQUID NAILS<sup>®</sup> Projects & Foamboard Interior Construction Adhesive

LIQUID NAILS® Projects & Foamboard Interior Construction Adhesive

View Data Sheets
Size

10 oz/300 mL (EA)

Find a Store
Are you a pro? Use our new online ordering tool.
woman taping off wall for painting

Product Details

LIQUID NAILS® Projects & Foamboard Adhesive (LN-604) offers water clean up when wet, bridges gaps up to 3/8", and has excellent water resistance and long-term holding power when set. Certified by UL Environment to meet the GREENGUARD Gold Standard as a low emitting material.

Features:

  • Bonds most common construction materials
  • Will not attack foam insulation
  • Low odor formula
  • Will not stain

Application Details

Insert tube into caulking gun. Cut nozzle to desired bead size marked on nozzle. Puncture inner seal with nail or wire. Apply adhesive in temperature of 60°F and higher. Press material into place. Lift off for 2-4 minutes, then press back into place. Material should not be applied to skinned adhesive. Do not apply to moist concrete or masonry.

Note: One surface must be porous.

Bonding material to furring strips or studs: Apply a zigzag 1/4" bead of adhesive to each strip or stud to be covered by material. Position materials so edges meet at stud center. Press firmly into place. Finishing nails required at top and bottom.

Bonding foamboard, foamback tub surrounds, paneling, corkboard, brick veneer, etc. to flat surfaces: Cover entire substrate with 1/4" vertical zig-zag bead a maximum of 12" apart and within 1-1/2" of all edges.

Looking for a datasheet? Access PPG's full datasheet portal here or visit https://products.ppgac.com/

Code Sizes Download
LN-604-12 10 oz/300 mL (EA)
LQN60472 10 oz/300 mL (EA)