HOMAX^® PRO GRADE^® Interior Aerosol Ceiling Texture Orange Peel - Water Based

Application Details

Spot prime repair area before texture application to ensure best results. Priming after texture application is no longer needed. Always practice spraying on cardboard or scrap drywall to determine preferred pattern.

1. Shake can upside-down vigorously until ball rattles, continue to shake for one full minute before use and continuously during use.
2. Slide red trigger lock back, away from tip.
3. Adjust pattern: Pointing away from face, turn yellow spray tip to desired pattern: clockwise for fine, counter clockwise for heavy.
4. Spray at a distance of 18” – 24” from ceiling using a circular (not sweeping) motion. Apply in random pattern, covering only 80% of surface. Shake can occasionally throughout use. Note: Depending upon pattern setting and temperature, distance may vary. Sprays best between 70-80*F. Run can under warm water to bring to room temperature.
5. Dry Time: Allow to dry 30-60 minutes before painting. Heavier textures may require longer dry time, depending upon temperature and humidity. Texture lightens in color when dry. Clean Up: Warm water.
6. After Use/To Store: Clear nozzle by turning can upside down, spray until texture is cleared. Release trigger completely, hold can body, and slide red trigger lock to click into lock position. Test to ensure lock is properly engaged.
7. Paint with 2 coats or more from complete hide and to match gloss (dependent upon color and paint manufacturer’s instructions).

WARNING: Cancer – www.P65Warnings.ca.gov.